You are browsing the Blog for Effects.

← Previous Entries

Erminardi: LE-1 Loudness Enhancer

March 21, 2012 in Erminardi, Filter

VN:F [1.9.15_1155]
Rating: 10.0/10 (1 vote cast)
Author Erminardi
Name LE-1 Loudness Enhancer
Link http://forums.planetz.com/viewtopic.php?f=16&t=20434

 

Erminardi:

LE-1 is a Loudness Enhancer.
I’ve built this for my own needs, but if U find it useful, take it for free ;)
It’s not formally a classic compressor and not a classic EQ, it’s a “signal fattener” with “eq” controls for high and low band plus a tube warmer.
I’ve built it for invigorate my “poor & constipated” native soft synthesizers (FM7, and some freeware). It’s calibrated in my own taste.
Try it also with standard Creamware synths like Uknow, Saturn or Miniscope, or try with voice recording and (with carefulness) with some poor MP3 songs (warning, maximized mix and/or higher pot levels can reach some unwanted distortion).

If U find some bugs and if U have some opinion, please let me know ;)

Enjoy =)

Dropout - www.cactusound.com

sound(at)cactusound.com

le-1
LE-1 final
LE-1 Plugin Archive

No Comments »

DerKnott: Liq_Flu & Liq_Flu Delay

March 13, 2012 in DerKnott, Modulation

VN:F [1.9.15_1155]
Rating: 9.0/10 (3 votes cast)
Author DerKnott
Name Liq_Flu
Link http://forums.planetz.com/viewtopic.php?f=16&t=24182

Modulation device totally unique for the Scope platform!  I have not tested this device (yet).  But there seems to be two different please  any review are welcome!

Some quotes from planetz:

Thank you very much, Martin !!! :D 
I tried the FLU_LIQ with the guitar for a while, and I can assure you, 
this is the best I´ve had since the Electro Harmonix ´s Electric Mistress, way back in in the mid-seventies, and not near as noisy as the Mistress. 
In fact, it´s possible to make an almost exact copy of the Mistress´s sound, minus the noice, wich I don´t miss. 
Great work, Martin !!

 

I forgot about trying to create a Liquid effect long ago as phasers and flangers and chorus always introduce artifacts that I wasn’t seeking. 
I know this is what I have yearned for years ago. :D 
I use to try a slow phaser on a rotary, you name it, and could never get it. 
This has to be the one that escaped me, but was captured by you. 
You have made so many nice things that work really well, but you hit this one out of the park IMO.

 

liqFlu_clean
FLU_LIQ_del
Flu_Liq Delay Plugin Archive
FLULIQ
FLULIQ Plugin Archive

1 Comment »

Roy Thinnes: Reloopah

January 23, 2012 in Roy Thinnes, Sampler

VN:F [1.9.15_1155]
Rating: 0.0/10 (0 votes cast)
Author Roy Thinnes
Name Reloopah
Link http://forums.planetz.com/viewtopic.php?f=16&t=27811
-in order to work, a ramp signal has to be connected to the ramp input of the device. preferred method is to load a ramp wave into host sequencer (can be downloaded here) and to send it via designated Asio output to the device. (don’t forget to set the correct tempo of the Reloopah device)
-controls:
–slice controls 1-16 – select the position of the slice you want. the red are the default positions
–output 1-16 (below) – the device has two pairs of outputs; select the slice output here – green=out1(default), red=out2
–dezip settings: default settings should work in most situations; if the loop contains much harmonic content, try to change/increase dezipNWRelease (default 300)
–sliceScaling: decrease slice length. when used, a gate effect is achieved; use dezipNWrelease to avoid clicks
–snap 1-18: buffers which include slice positions, dezip, sliceScaling settings.
–randomize: when first used, slice positions are initialized=all on pos.1; press again to get random slice positions
–preset list for all parameters (little icon)
–preset list just for slice positions, dezip, sliceScaling settings
download device here
download dsp file here
audio examples:
reggae(A.Pool)
EW&F+DrLoop
have fun!
ps as already mentioned – this device is a dsp hog; don’t be worried if it takes some time to load

 

ReloopahDevice

No Comments »

DerKnott: SATEQ

January 21, 2012 in DerKnott, Filter

VN:F [1.9.15_1155]
Rating: 9.5/10 (8 votes cast)

Thanks to pixelbites. This looks really better than anything else.
For contributions (as asked for in the other love-thread) please pm me and of course pixelbites. I see donations not related to my work with sdk, but to my “artwork” as a whole and I ask nobody to give me money for my devices.

VERSION 1.2 with a widener version ;) . Sorry, the DSP knobs were set in the wrong order in version 1.0 & 1.1.
Like a chorus for certain frequencies. Try it with a delay in the insert, it’s fantastic.

JIMMY’s request:
Version 1.3 now with better preset handling… (saves presets location in projects) To be honest, I did not really work with SDK for some time, so I hope I (quickly) did everything right.
B.t.w. is that midi-controller-handling-problem finally adressed by someone, … ?

version 2.0beta
Sorry, but I have to say that all 1.x versions were crap 8) It was one of my old devices where I still had to learn a lot.
Much more is possible with version 2.0beta. Shroomz will kill me because of the additional knobs… It would have been possible somehow to avoid them, but as you know I like tweaking …

I think it remembers now all ccs in project. Fatter sounds are possible. I have an idea for 3.0 but don’t know if it will be better – rather a different device.

SATEQvintage

 

Tags: ,
1 Comment »

DerKnott: MOVEQ+

January 21, 2012 in DerKnott, Filter

VN:F [1.9.15_1155]
Rating: 9.2/10 (5 votes cast)

Thanks for downloading MOVEQ+ so many times!!!!
Here comes MOVEQ+ 1.3.

I’m so sorry, that I realized 1 year after first release of a ‘final’ version, that dsp-distribution wasn’t optimal. That could cause problems when using MOVEQ+ in my MOVamily-MS-processor.
Here comes the optimized versions 8 & 4 inluding the CUT-versions.
2-EQ-version was O.K. with dsp-distribution.

In the zip you’ll find a little present to dry the tears. I call it “M-EQ-S”. It’s a very simple but nice device, I think.

Martin

moveq
MOVEQ%2B_user_manual

 

Tags: , ,
No Comments »

HifiBoom: RSPV-01 High Class Plate

January 21, 2012 in HifiBoom, Reverb

VN:F [1.9.15_1155]
Rating: 9.0/10 (6 votes cast)
Author HifiBoom
Name RSPV-01
Link http://forums.planetz.com/viewtopic.php?f=16&t=22376

okay I am happy to announce a new reverb plug-in.

Forget my old reverb checkouts….
I`ve reworked the stuff from scratch with better algo design…

Much work has gone into it ! :P

Now with more friendly surface and small manual !
Special care was also done about DSP usage. So its pretty low on the DSP hit :)

Have fun ! :)

plate

Tags:
1 Comment »

Shroomz~> Spinner DE

January 19, 2012 in Delay, Shroomz~>

VN:F [1.9.15_1155]
Rating: 9.0/10 (6 votes cast)
Author Shroomz~>
Name Spinner DE
Link http://forums.planetz.com/viewtopic.php?f=16&t=27200

here is a Delay Edition of SPINNER. The configuration is Delay1 > SPINNER > Delay2. The delays are purely tempo-based. You can set the BPM values with the BPM pots or by typing your desired tempo into the BPM displays. After setting your tempo/s you can then set separate Quantize values for L & R to give you your desired delay time/s.

Presets should be fully working, but I haven’t made very many for this yet, so in the meantime, you can either create your own preset bank from scratch or make a copy of the ‘SPINNER.pre’ file & rename it to ‘SPINNER DE.pre’ which will allow you to load the default SPINNER presets.

Have fun & let me know what you think. :cool:

~Mark

SPINNER_DE_screenshot

Tags: ,
1 Comment »

Shroomz~> Spinner

January 19, 2012 in Filter, Shroomz~>

VN:F [1.9.15_1155]
Rating: 9.2/10 (5 votes cast)
Author Shroomz~>
Name Spinner
Link http://forums.planetz.com/viewtopic.php?f=16&t=27167

SPINNER is a FAT 24dB multimode resonant filter with Low Pass, High Pass, Band Pass & Notch modes

Frequency range – 20 Hz to 20 kHz
Modulation frequency range 0.1 Hz to 1.0 Hz
Spread parameter – 0 to max (spreads frequency of poles 3&4 away from poles 1&2)

Let me know what you think & if you find any issues or problems.

~Mark

 

SPINNERscreenshotNEW01

No Comments »

DerKnott: MuBaCo V

January 19, 2012 in DerKnott, Dynamic

VN:F [1.9.15_1155]
Rating: 8.6/10 (5 votes cast)
Author DerKnott
Name MuBaCo V
Link http://forums.planetz.com/viewtopic.php?f=16&t=20875

MuBaCo V is getting close to its final beta stage…
I post this version to give you a first impression of this beautiful device. Functionality works the way it should, but there is still lot to do with some layout-things.

IMPORTANT!!!!!!!

- put files 1, 2, f1, f2, sc2, sc, tc1b in your DSP-folder:
Otherwise MuBaCo will not work.

- don’t forget to try the different band-saturation-modes

- 12db filters are not so easy to handle so I put them on the experimental side as an additional feature

=> band-saturation and other features need serious DSP. Turn off when using small cards. There is no guaranty MuBaCo will work properly on small cards regarding phase issues. I tested it on a 15 DSP card!

I have tested MuBaCo carefully and found it very usefull in my everyday-work. With the new surface it’s not 100% finished, but I couldn’t hold it back any longer.
As with all my devices, there is no guaranty for anything. Consider them as experimental beta-stuff.
Work with them on your own risk.

MuBaCo is free, you may give it for free to your friends, but you are not allowed to take any money for it or distribute it widely.

If you find MuBaCo gives you a value that’s worth some money, please SUPPORT THE SCOPE PLATFORM, SC and the 3rd Party developers by spending money on some new devices by them or a new SCOPE-card !!!! 

1000000 Thanks for the new supercool surface by PIXELBITES.

MuBaCo_Option
MuBaCo_main

Tags:
1 Comment »

Shroomz~> SPACE EQ

January 18, 2012 in Filter, Shroomz~>

VN:F [1.9.15_1155]
Rating: 7.3/10 (7 votes cast)
Author Shroomz~>
Name SPACE EQ
Link http://forums.planetz.com/viewtopic.php?f=16&t=27041

SPACE EQ – simple Stereo EQ device for mixing & mastering

I’m pleased to give you my first new Scope device creation in over 5 months – SPACE EQ. It’s a very simple stereo-only device that combines EQs based on on Creamware’s excellent 2-band parametric with a spacial technique which doesn’t involve delay or reverberation. The spacial effect can be turned off simply by turning the ‘SPACE’ parameter fully left. There’s also a softclip at the output stage which can be switched on & off.

The Low & High frequency EQ parameters all use stepped potentiometers for ease of making very quick settings. The EQ values & ranges have been set up with the sole idea in mind that the device can be used for mixing & mastering purposes (probably with no or very little use of the SPACE parameter, which is a special effect for those who like to dabble with experimental mixing techniques). I made SPACE EQ for my own mixing knowing that I will sometimes wish to mix with 3 or 4 dB boosts at 60-80Hz & 8-16kHz.

Feel free to let me know what you think..

SPACE_EQ_screenshot

No Comments »

← Previous Entries